LW-PLA-HT is a new generation light weight formulation. The key difference with the original LW-PLA:
|
|
LW-PLA |
LW-PLA-HT |
|
1st layer temp |
Same as other layers |
200-210C |
|
1st layer flow |
Same as other layers |
100% flow |
|
1st layer perimeter |
Same as other layers |
2 perimeters |
|
layerheight |
Sometimes sliced at 0.3mm |
Maximum 0.2mm (for 0.4mm nozzle) |
|
temperature |
230-240C |
230-240C |
|
Flowrate |
40-45% |
50-60% |
|
Heated bed |
50C |
60C |
|
Bed Adhesion |
- |
Brim for large parts |
|
Adhesion promoter |
- |
3DLac |