Download Filament profiles
For the most accurate results, we recommend using our Filament Profiles, which contain printer- and slicer-specific settings for varioShore TPU 95A filament developed and tested by the colorFabb team.
General Print settings
If you're looking for general print settings, drying guidelines or technical data for varioShore TPU 95A filament, visit our Print Support page.
|
Advised 3D printing temperature 190C-250C |
|
Advised 3d print speed 20-30 mm/s |
|
Advised Heated bed 20-40C |
|
Cooling fan Use the least amount of cooling when maximum foaming is required. For better overhang performance use 50-100% cooling. We advise our community to use standard TPU settings as a base setting for developing your own pre-sets. Make sure the distance between nozzle and platform is not to small, especially if the material is being foamed while printing, the pressure will need to be released from the hot-end to prevent clogging and feeder issues. |
For more info check out our colorFabb website