PA (polyamide) filaments by colorFabb enable users to start printing truly functional parts. By enhancing the best possible PA in the market with custom developed additives we offer high-end 3D printing filament for pro users and engineers.
At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of PA has been tested using various 3D printers, which has resulted in the following recommended settings.
|
Adviced 3D printing temperature 260C-280C |
|
Adviced 3d print speed 30 - 40 mm/s |
|
Advised Heated bed ambient - 50C For heated glass plate buildsurface we can recommend using 3DLac for extra adhesion. |
|
Cooling fan 50% fan cooling is a good starting point, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion. |