Download Filament profiles
For the most accurate results, we recommend using our Filament Profiles, which contain printer- and slicer-specific settings for LW-PLA-HT developed and tested by the colorFabb team.
General Print settings
If you're looking for general print settings, drying guidelines or technical data for LW-PLA-HT, visit our Print Support page.
|
Advised 3D printing temperature 195-240C* |
|
Advised 3d print speed 40 - 100 mm/s |
|
Advised Heated bed Cold bed advised + 3DLac + Brim |
|
Cooling fan 100% cooling. |
More about LW-PLA-HT
This formulation features an increased temperature resistance compared to our original LW-PLA.
Thin printed structures will be able to handle heat from external sources such as the sun much better and prolong the time until failure. Not convinced? Check out our comparison video in the image gallery between regular LW-PLA and LW-PLA-HT.
Our LW-PLA-HT is the best filament for printing RC Planes, Cosplay and other light weight items. Parts are feather light, yet retain good strength and are easy to cut, trim and sand.
Read our tutorial: Upgrading from LW-PLA to LW-PLA-HT, what you need to know.
Watch this video: Video CNC kitchen
|
Material: colorFabb LW-PLA-HT |
|
Diameter Tolerance: ± 0.1 mm |
|
Density: 1.210-1.430 g·cm-3 (non activated density) 0.530 – 0,620 g·cm-3 (maximum activated density) |
|
HDT: 71 C (unfoamed sample) |
For more info check out our colorFabb website