PLA Economy is a high quality 3D printing filament, available on XL and larger spools only in a limited amount of colors. With the added impact modifier it is a bit tougher than your average PLA filament. By keeping the portfolio limited and on large spools only we are able to keep the price per kg as low as possible.
PLA Economy is a perfect solution for users in need for large volumes of quality filament at an affordable price.
At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of Economy PLA has been tested using various 3D printers, which has resulted in the following recommended settings.
| Advised 3D printing temperature 195C-220C |
| Advised 3d print speed 40 - 100 mm/s |
| Advised Heated bed 50-60C |
| Cooling fan 100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion. |