Download Filament profiles
For the most accurate results, we recommend using our Filament Profiles, which contain printer- and slicer-specific settings for PLA corkFill filament developed and tested by the colorFabb team.
General Print settings
If you're looking for general print settings, drying guidelines or technical data for PLA corkFill filament, visit our Print Support page.
|
Advised 3D printing temperature 210-230C* |
|
Advised 3d print speed 40 - 60 mm/s |
|
Advised Heated bed 50-60C |
|
Cooling fan - |
TIP! For stronger prints and better reliability increase flow rate with about 4 -10%.
For more info check out our colorFabb website