Download Filament profiles
For the most accurate results, we recommend using our Filament Profiles, which contain printer- and slicer-specific settings for PLA glowFill filament developed and tested by the colorFabb team.
General Print settings
If you're looking for general print settings, drying guidelines or technical data for PLA glowFill filament, visit our Print Support page.
|
Advised 3D printing temperature 195-220C* |
|
Advised 3d print speed 40 - 100 mm/s |
|
Advised Heated bed 50-60C (if you have one, not strictly necessary) |
|
Cooling fan - |
TIP! For a better and longer lasting glow time print your models with 100% infill and charge up your models with some high power lights, or just let them enjoy the sunlight for a bit.
For more info check out our colorFabb website