At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of PLA Vertigo has been tested using various 3D printers, which has resulted in the following recommended settings.
| Adviced 3D printing temperature 195-220℃ |
| Adviced 3d print speed 40 - 100 mm/s |
| Advised Heated bed 50-60C |
| Cooling fan 100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion. |