Download Filament profiles
For the most accurate results, we recommend using our Filament Profiles, which contain printer- and slicer-specific settings for nGen filament developed and tested by the colorFabb team.
General Print settings
If you're looking for general print settings, drying guidelines or technical data for nGen filament, visit our Print Support page.
|
Advised 3D printing temperature 220-240C |
|
Advised 3d print speed 40 - 70 mm/s |
|
Advised Heated bed 75-85C |
|
Cooling fan nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate. Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick. |
For more info check out our colorFabb website