Download Filament profiles
For the most accurate results, we recommend using our Filament Profiles, which contain printer- and slicer-specific settings for nGen_FLEX filament developed and tested by the colorFabb team.
General Print settings
If you're looking for general print settings, drying guidelines or technical data for nGen_FLEX filament, visit our Print Support page.
|
Advised 3D printing temperature 240-260C |
|
Advised 3d print speed 40 - 60 mm/s |
|
Advised Heated bed 80C + buildTak |
|
Cooling fan nGen_FLEX gives best results on a buildTak covered buildplate, heated at around 80C. not too close, first layer should not be squeezed too much. |
For more info check out our colorFabb website