Innovation never stops at colorFabb. Our ever expanding range of special filaments have been industry leading for years. Some of them are for aesthetic purposes, others are pure functionality or for specific niche applications. Materials like woodFill, bronzeFill, XT-CF20, LW-PLA, and varioShore TPU were developed in-house and have been successes ever since. By listening to our customers’ needs and forging strategic partnerships with material OEMs we are able to innovate continuously and bring FDM/FFF 3D printing to the next level.
Please note that most materials have specific printing instructions. Consult the individual article pages for more information.
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
| Advised 3D printing temperature 190-210C* |
| Advised 3d print speed 40 - 80 mm/s |
|
Advised Heated bed |
| Cooling fan - |
TIP! Steel nozzles
The high steel content of the steelFill material makes this filament quite abrasive to brass nozzles. It’s not as bad as the carbon fiber, XT-CF20 materials, but can effect the print quality after printing 1.5 kg. Therefore it’s recommended to print with abrasive resistant nozzles, for instance the E3D hardened steel nozzle, the JET RSS50 and performance 3-d Hercules nozzles.
For more info check out our colorFabb website