Innovation never stops at colorFabb. Our ever expanding range of special filaments have been industry leading for years. Some of them are for aesthetic purposes, others are pure functionality or for specific niche applications. Materials like woodFill, bronzeFill, XT-CF20, LW-PLA, and varioShore TPU were developed in-house and have been successes ever since. By listening to our customers’ needs and forging strategic partnerships with material OEMs we are able to innovate continuously and bring FDM/FFF 3D printing to the next level.
Please note that most materials have specific printing instructions. Consult the individual article pages for more information.
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
|Adviced 3D printing temperature
|Adviced 3d print speed
40 - 100 mm/s
Advised Heated bed
TIP! For stronger prints and better reliability you can increase flow rate with about 0-10%. This will cause the filament to keep going through the hot zone at a steady pace.
Please note that due to different batches of wood fibers slight color differences can occur between batches. This is the nature of… well, nature.
For more info check out our colorFabb website