Innovation never stops at colorFabb. Our ever expanding range of special filaments have been industry leading for years. Some of them are for aesthetic purposes, others are pure functionality or for specific niche applications. Materials like woodFill, bronzeFill, XT-CF20, LW-PLA, and varioShore TPU were developed in-house and have been successes ever since. By listening to our customers’ needs and forging strategic partnerships with material OEMs we are able to innovate continuously and bring FDM/FFF 3D printing to the next level.
Please note that most materials have specific printing instructions. Consult the individual article pages for more information.
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and tricks for using colorFabb 3d printing filament.
| Advised 3D printing temperature 190C-250C |
| Advised 3d print speed 20-30 mm/s |
| Advised Heated bed 20-40C |
| Cooling fan Use the least amount of cooling when maximum foaming is required. For better overhang performance use 50-100% cooling. We advise our community to use standard TPU settings as a base setting for developing your own pre-sets. Make sure the distance between nozzle and platform is not to small, especially if the material is being foamed while printing, the pressure will need to be released from the hot-end to prevent clogging and feeder issues. |
For more info check out our colorFabb website