Download Filament profiles
For the most accurate results, we recommend using our Filament Profiles, which contain printer- and slicer-specific settings for PETG Semi-Matte filament developed and tested by the colorFabb team.
General Print settings
If you're looking for general print settings, drying guidelines or technical data for PETG Semi-matte filament, visit our Print Support page.
|
Advised 3D printing temperature 235C-255C |
|
Advised 3d print speed 30 - 50 mm/s |
|
Advised Heated bed 70-80C |
|
Cooling fan 75/100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion. |
For more info check out our colorFabb website