Download Filament profiles
For the most accurate results, we recommend using our Filament Profiles, which contain printer- and slicer-specific settings for XT filament developed and tested by the colorFabb team.
General Print settings
If you're looking for general print settings, drying guidelines or technical data for XT filament, visit our Print Support page.
|
Advised 3D printing temperature 240-260C |
|
Advised 3d print speed 40 - 70 mm/s |
|
Advised Heated bed 60-70C |
|
Build platform For colorFabb_XT we advice to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part. |
For more info check out our colorFabb website